< img height="1" width="1" src="https://www.facebook.com/tr?id=6135979856482392&ev=PageView &noscript=1"/>

Sheet metal fabrication steel parts for Aerospace application

The project of sheet metal bending steel parts used in aerospace industrial,it was one project finished in 2016.

 

The sheet metal if with the thickness of 0.5-4mm is not big case to be fabricated by sheet metal press. If the thickness of sheet metal is over than 6mm it would be difficult since it’s too thick.

 

Then the project with the thickness exact 6mm of sheet metal and also it was very large with the dimension of 1190×523×197mm for some parts.

 

We first step to laser cutting to cut through the hollow parts and then to shape the parts by sheet metal press.

SERVICE

CASE STUDIES

EXTRA NAVIGATION

CONTACT US

 Mobile: +86-0769 8188 8007
                   +86-1360 0338 681
  Address: No. 4 JinPing Road, ChangAn, DongGuan City GuangDong 523853, China
Copyright © 2020 BOEN Rapid Co.,Limited All rights reserved                                   ISO 9001:2015 certified factory.